View AP2317H-33TR_9114761.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 1 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited figure 1. package types of ap2317 sot-89-3 sot-223 general description the ap2317 is a series of low dropout three-terminal regulators with a dropout of 1.1v at 600ma output cur- rent. this product has been optimized for low voltage where transient response and minimum input voltage are criti- cal. the ap2317 provides current limit and thermal shutdown. its circuit includes a trimmed bandgap refer- ence to assure output volta ge accuracy to be within 1%. on-chip thermal shutdown provides protection against any combination of overload and ambient tem- peratures that would create excessive junction tem- peratures. the ap2317 is available in 2.5v and 3.3v versions. the fixed versions integrate the adjust resistors. it is also available in an adjust able version which can set the output voltage with two external resistors. the ap2317 series regulators are available in the industry standard sot-89-3, sot-223 and to-263-3 (for 3.3v only) power packages. features low dropout voltage: 1.1v at 600ma output current output noise from 10hz to 10khz: 0.003% psrr at i out =300ma and f=120hz: 75db output voltage accuracy: 1% on-chip thermal shutdown maximum quiescent current : i qmax =5ma esd (human body model): 3.5kv operation junction temperature: -40 to 125 o c applications dvd/cd-rom usb device add-on card dvd player pc motherboard to-263-3
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 2 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited figure 2. pin configuration of ap2317 (top view) h package (sot-223) input output adj/gnd v out 1 2 3 r package adj/gnd output input v out (sot-89-3) 3 2 1 pin configuration 3 2 1 gnd output input s package (to-263-3)
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 3 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited ordering information circuit type package r: sot-89-3 h: sot-223 adj: adjustable output 2.5: fixed output 2.5v 3.3: fixed output 3.3v e1: lead free blank: tin lead ap2317 - tr: tape and reel blank: tube functional block diagram figure 3. functional block diagram of ap2317 thermal protection + - for adjustable output, disconnect a1 and a2, connect b input output adj/gnd a1 a2 b for fixed output, connect a1 and a2, disconnect b 2 1 3 s: to-263-3
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 4 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited recommended operating conditions note 1: stresses greater than those listed under "absolute maximum ratings" ma y cause permanent damage to the device. these are stress ratings only, and functi onal operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. exposure to "absolute maximum ra tings" for extended periods may affect device reliability. parameter symbol value unit input voltage v in 15 v operating junction temperature range t j 150 o c storage temperature range t stg -65 to 150 o c lead temperature (soldering, 10sec) t lead 300 o c esd (human body model) esd 3500 v esd (machine model) esd 400 v parameter symbol min max unit input voltage v in 12 v operating junction temperature range t j -40 125 o c storage temperature range t stg -65 150 o c absolute maximum ratings (note 1) bcd semiconductor's pb-free products, as designated with "e1" suffix in th e part number, are rohs compliant. package temperature range part number marking id packing type tin lead lead free tin lead lead free sot-89-3 -40 to 125 o c ap2317r-adjtr ap2317r-adjtre1 r27a e27a tape & reel ap2317r-2.5tr ap2317r-2.5tre1 r27b e27b tape & reel ap2317r-3.3tr ap2317r-3.3tre1 r27c e27c tape & reel sot-223 -40 to 125 o c ap2317h-adjtr ap2317h-adjtre1 h27a eh27a tape & reel ap2317h-2.5tr ap2317h-2.5tre1 h27b eh27b tape & reel ap2317h-3.3tr ap2317h-3.3tre1 h27c eh27c tape & reel to-263-3 -40 to 125 o c ap2317s-3.3 ap2317s-3.3e1 ap2317s-3.3 ap2317s-3.3e1 tube ap2317s-3.3tr ap2317s-3.3tre1 ap2317s-3.3 ap2317s-3.3e1 tape & reel ordering information (continued)
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 5 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited parameter symbol conditions min typ max unit reference voltage v ref ap2317-adj i out =10ma, v in -v out =2v, t j =25 o c 10ma i out 600ma, 1.4v v in -v out 8v p maximum power dissipation 1.238 1.225 1.250 1.250 1.262 1.270 v output voltage v out ap2317-2.5 i out =10ma, v in =4.5v, t j =25 o c 10ma i out 600ma, 3.9v v in 10v 2.475 2.450 2.5 2.5 2.525 2.550 v ap2317-3.3 i out =10ma, v in =5.0v, t j =25 o c 10ma i out 600ma, 4.75v v in 10v 3.267 3.235 3.3 3.3 3.333 3.365 v line regulation ? v out ap2317-adj i out =10ma, 1.5v v in -v out 10v 0.035 0.2 % ap2317-2.5 i out =10ma, 1.5v v in -v out 10v 1 6 mv ap2317-3.3 i out =10ma, 1.5v v in -v out 10v 1 6 mv load regulation ? v out ap2317-adj (v in -v out )=2v, 10ma i out 600ma 0.2 0.4 % ap2317-2.5 (v in -v out )=2v, 10ma i out 600ma 1 10 mv ap2317-3.3 (v in -v out )=2v, 10ma i out 600ma 1 10 mv dropout voltage ? v ref =1%, i out =0.6a 1.1 1.3 v current limit i limit (v in -v out )=2v 0.75 0.9 a adjust pin current 60 120 a adjust pin current change 1.4v ( v in -v out ) 10, 10ma i out 600ma 0.2 5 a minimum load current 1.5v ( v in -v out ) 10v (adj only) 1.7 5 ma quiescent current v in =v out +1.25v 5 ma ripple rejection f=120hz, c out =22 f tantalum ( v in -v out )= 3v, i out =300ma 60 75 db temperature stability 0.5 % long-term stability t a =125 o c, 1000hrs. 0.3 % rms output noise t a =25 o c, 10hz f 10 khz 0.003 % thermal shutdown junction temperature 150 o c thermal shutdown hysteresis 25 o c thermal resistance jc sot-89-3 37 o c/w sot-223 33 to-263-3 7 operating conditions: v in 10v,t j =25 o c, unless otherwise specified. (p maximum power dissipation) limits appearing in boldface type apply over the entire junc tion temperature ra nge for operation, -40 o c to 125 o c electrical characteristics
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 6 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited typical performance characteristics figure 5. load regulation vs. junction temperature -40 -20 0 20 40 60 80 100 120 140 -10 -5 0 5 10 15 20 load regulation (mv) junction temperature ( o c) figure 4. line regulation vs. junction temperature -40 -20 0 20 40 60 80 100 120 140 -15 -10 -5 0 5 10 15 line regulation (mv) junction temperature ( o c) figure 6. reference voltage vs. junction temperature figure 7. output voltage vs. junction temperature -40 -20 0 20 40 60 80 100 120 140 3.100 3.125 3.150 3.175 3.200 3.225 3.250 3.275 3.300 3.325 3.350 3.375 3.400 output voltage (v) junction temperature ( o c) ap2317-3.3 v in =4.8v i out =10ma -40 -20 0 20 40 60 80 100 120 140 1.220 1.225 1.230 1.235 1.240 1.245 1.250 1.255 1.260 1.265 1.270 reference voltage (v) junction temperature ( o c) ap2317-adj v in =4.8v i out =10ma
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 7 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited figure 11. maximum power dissipation 20 40 60 80 100 120 140 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 power (w) case temperature ( o c) sot-89-3 figure 10. dropout voltage vs. output current 0 100 200 300 400 500 600 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.35 1.40 t j =-40 o c t j =125 o c t j =25 o c t j =0 o c dropout voltage (v) output current (ma) typical performance ch aracteristics (continued) figure 8. minimum load current vs. junction temperature -40-20 0 20406080100120140 -2 -1 0 1 2 3 minimum load current (ma) junction temperature ( o c) ap2317-adj figure 9. adjust pin current vs. junction temperature -40 -20 0 20 40 60 80 100 120 140 0 10 20 30 40 50 60 70 80 90 100 adjust pin current ( a) junction temperature ( o c) ap2317-adj v in =4.8v i out =10ma
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 8 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited figure 12. line transient response figure 13. load transient response figure 14. psrr vs. frequency -40 -20 0 20 40 60 80 100 120 140 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 current limit (a) junction temperature ( o c) figure 15. current limit vs. junction temperature 10 100 1k 10k 100k 10 20 30 40 50 60 70 80 psrr (db) frequency (hz) v out v in =4.8v v out i out =600ma i out =10ma typical performance ch aracteristics (continued)
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 9 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited typical applications figure 16. typical applications of ap2317 ap2317-adj v in v out adj v in =11v 10 f tantalum r1 124 ? r2 768 ? 22 f tantalum 9v at 0.6a ++ ++ v in =5.3v ap2317-3.3 v in v out gnd 10 f tantalum 22 f tantalum 3.3v at 0.6a v out =v ref * ( 1+r2/r1) + i adj * r2
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 10 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited mechanical dimensions sot-89-3 unit: mm(inch) 1.400(0.055)* 1.630(0.064) 4.400(0.173) 0.360(0.014) 0.440(0.017) 3.000(0.118) 0 . 9 0 0 ( 0 . 0 3 5 ) 2 . 3 0 0 ( 0 . 0 9 1 ) 3 . 9 5 0 ( 0 . 1 5 6 ) 1.400(0.055) 0.360(0.014) 1 0 3 1 0 r0.200(0.008) r0.150(0.006) 0 . 0 0 0 ( 0 . 0 0 0 ) 3 1.600(0.063) 0.440(0.017) 0.560(0.022) 2 . 6 0 0 ( 0 . 1 0 2 ) 0.480(0.019) 4.600(0.181) 1.830(0.072) 1 . 2 0 0 ( 0 . 0 4 7 ) 4 . 2 5 0 ( 0 . 1 6 7 ) 0 . 0 7 6 ( 0 . 0 0 3 ) 0.360(0.014) 0.480(0.019)
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 11 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited mechanical dimens ions (continued) unit: mm(inch) sot- 223 3.300(0.130) 3.700(0.146) 6.700(0.264) 7.300(0.287) 2.900(0.114) 3.100(0.122) 0.610(0.024) 0.810(0.032) 2.300(0.091) typ 6.300(0.248) 6.700(0.264) 1.750(0.069) typ 4.500(0.177) 4.700(0.185) 0.020(0.001) 0.100(0.004) 1.520(0.060) 1.800(0.071) 1.500(0.059) 1.700(0.067) 0 . 2 5 0 ( 0 . 0 1 0 ) 0 . 3 5 0 ( 0 . 0 1 4 ) 0.250(0.010) 0 10 0.900(0.035) min
600ma low dropout linear regulator ap1117m data sheet 600ma low dropout linear regulator ap2317 12 sep. 2005 rev. 1. 4 bcd semiconductor manufacturing limited mechanical dimens ions (continued) to-263-3 unit: mm(inch) 7 3 7 8 . 6 4 0 ( 0 . 3 4 0 ) 9 . 6 5 0 ( 0 . 3 8 0 ) 0.990(0.039) 0.510(0.020) 2.540(0.100) 1.150(0.045) 9.650(0.380) 3 1 4 . 7 6 0 ( 0 . 5 8 1 ) 8.840(0.348) 2.640(0.104) 0.020(0.001) 8 2 0 6 0.380(0.015) 2 . 3 9 0 ( 0 . 0 9 4 ) 0.360(0.014) 2 . 2 0 0 ( 0 . 0 8 7 ) 7 0 10.290(0.405) 4 . 0 7 0 ( 0 . 1 6 0 ) 4 . 8 2 0 ( 0 . 1 9 0 ) 1.390(0.055) 1.150(0.045) 1.390(0.055) 2.540(0.100) 1.270(0.050) 1.390(0.055) 2 . 6 9 0 ( 0 . 1 0 6 ) 1 5 . 7 4 0 ( 0 . 6 2 0 ) 0.250(0.010) 2.700(0.106) 0.400(0.016) 5 . 6 0 0 ( 0 . 2 2 0 ) 7.420(0.292) 7.980(0.314) 2.540(0.100) 2.540(0.100)
important notice bcd semiconductor manufacturing limited reserves the right to make changes without further not ice to any products or specifi- cations herein. bcd semiconductor manufacturing limited does not as sume any responsibility for us e of any its products for any particular purpose, nor does bcd semiconductor manufacturi ng limited assume any liability aris ing out of the application or use of any its products or circui ts. bcd semiconductor manufacturing limited does not convey any license under its patent rights or other rights nor the rights of others. - wafer fab shanghai sim-bcd semiconductor manufacturing limited 800, yi shan road, shanghai 200233, china tel: +86-21-6485 1491, fax: +86-21-5450 0008 bcd semiconductor manufacturing limited main site regional sales office shenzhen office shanghai sim-bcd semiconductor manuf acturing co., ltd. shenzhen office advanced analog circuits (shanghai) corporation shenzhen office 27b, tower c, 2070, middle shen nan road, shenzhen 518031, china tel: +86-755-8368 3987, fax: +86-755-8368 3166 taiwan office bcd semiconductor (taiwan) company limited 4f, 298-1, rui guang road, nei-hu district, taipei, taiwan tel: +886-2-2656 2808, fax: +886-2-2656 2806 usa office bcd semiconductor corporation 3170 de la cruz blvd., suite 105, santa clara, ca 95054-2411, u.s.a tel: +1-408-988 6388, fax: +1-408-988 6386 - ic design group advanced analog circuits (shanghai) corporation 8f, zone b, 900, yi shan road, shanghai 200233, china tel: +86-21-6495 9539, fax: +86-21-6485 9673 bcd semiconductor manufacturing limited http://www.bcdsemi.com

▲Up To Search▲

Price & Availability of AP2317H-33TR

	To Download AP2317H-33TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .